Subject: Mon.
Date: Mon, 3 Jan 2000 19:48:44 EST
From: DMeyer8142@aol.com
To: rodl@scc.net

Rod-
I am chasing the flash problem around, and I can see a real healthy
/CS,/RD,+/WR. But I cannot change the flash ADDR bits, they all stay high!.
What I have tried is manually entering the opcodes into ram from the monitor,
for example, Port 4:
C2,C0,C2,C1,C2,C2,C2,C3,C2,C4,C2,C5,C2,C6.C2,C7.
Which should compliment the individual port 4 bits when run in a loop, but it
does not! My question would be have you ever seen these bits move?, if so
then there must be something that I'm not doing. And if not, there is
something that neither
of us are doing, which would explain the flash not working, let me know
Don